| Attribute | Data |
|---|---|
| Identifier | Thea Pro 145-180mm |
| ETIM class | EC001744 - Downlight/spot/floodlight |
| Lamp designation and type | Other LED not exchangeable |
| With light source | Yes |
| Wattage range | 14W |
| CCT range | 4000K |
| Degree of protection (IP) | IP65 |
| Dimming method | On-Off |
| Sensor option | None |
| Emergency option | None |
| Warranty | 5 years |
| Attribute | Data | Polar plot |
|---|---|---|
| Unified glare ratio (UGR) | 22 | |
| Colour rendering index | CRI>80 |
|
| Colour consistency SDCM | SDCM4 | |
| Photobiological safety according to EN 62471 | RG1 | |
| Identifier | CCT | Beam angle (°) |
|---|---|---|
| Thea Pro 145-180mm |
4000K
4000K
|
80 |
| Attribute | Data |
|---|---|
| Protection Class | II |
| Input | 220-240V AC |
| Inrush Current | 6.9A 0.3ms |
| Type of wiring required | Parallel |
| With control gear | No |
| Type of control gear | LED operating device current-controlled |
| Dimming method | On-Off |
| Total harmonic distortion (THD) (%) | 20% |
| Power factor | 0.9 |
| Sensor Option | None |
| Solar cells included | No |
| Attribute | Data | Line drawing |
|---|---|---|
| Housing material | ADC12 Aluminium Alloy, PC, PET | |
| Reflector finish | White |
|
| Material cover | Plastic, opal | |
| Tiltable (°) | Fixed | |
| Rotation angle (°) | Fixed | |
| Beam angle adjustable | No | |
| Degree of protection (IP) | IP65 | |
| Degree of protection (IP), front side | IP65 | |
| Degree of protection (IP), rear side | IP20 | |
| Impact strength | IK03 | |
| Ambient temperature (°C) | -20-40°C | |
| Filament test according to IEC 60695-2-11 | 850 °C - 30 s | |
| Attribute | Data |
|---|---|
| Rated life time | L80 80,000h |
| Attribute | Data |
|---|---|
| Indoor / Outdoor | Indoor use only |
| Mounting type | Recessed |
| Install connector type | Push-fit terminal, loop-in/loop-out |
| Insulation Coverable | Luminaire: Rolled and blown insulation Driver: no |
| Attribute | Data |
|---|---|
| Emergency option | None |
| Emergency function monitoring system | None |
| Battery warranty | 5 years |
| Identifier | Short description |
|---|---|
|
DRV3001050
|
CC Driver 42W IP20 300-1050mA Class II SELV Forward voltage range from 9 to 52Vdc |
|
LEDEP10
|
Emergency converter, Self-test & Manual-test switchable, maintained |
|
CASDRV10W
|
Casambi Wireless Driver 10W pre-wired with DC plug |
|
CASDRV25W
|
Casambi Wireless Driver 25W pre-wired with DC plug |
|
THP12UGR
|
Compatible with THP1 + THP2 |
|
THP1DD
|
Thea Pro DALI-2 Driver THP1 |
|
THP23DD
|
Thea Pro DALI-2 Driver THP2 + THP3 |
|
Thea Pro Colour
|
Colour Inserts for the Thea Pro Range |
|
THP12SURKITB
|
Surface mounting kit for thea pro range |
|
THP12SURKITW
|
Surface mounting kit for thea pro range |
|
CASRECW
|
Recessed or Surface mounted PIR+Daylight sensor for use up to 4m |
| Attribute | Data |
|---|---|
| Compliance with European standards | NBN EN 60598 |
| Compliance with European directives | LVD 2014/35/EUEMC 2014/30/EUERP 2019/2020RED 2014/53/EURoHS 2011/65/EUREACH 1907/2006/ECDEEE 2012/19/EU |
| CE conformity |
|
| ENEC conformity | No |
| Attribute | Data |
|---|---|
| Replaceable light source |
|
| Replaceable driver |
|
| LED Energy class |
|